Mac-Eight BOARD TO BOARD CONNECTOR (SMT)

BOARD TO BOARD CONNECTOR (SMT)

Board To Board Connector [OQ Series] (10pcs/pack)	PAT

Dimension plan

Use as male pin for SMT board, Aluminum board, Iron board, Ceramics bord, etc which can not use through hole.
Also usable as a leg of hybrid IC.

Material	Pin part	Phosphorus bronze (OQ-11, 12, 13 series)
	Pin part	Brass (OQ-21, 22, 23, 43 series)
	Resin part	PCT black (UL94V-0)
	Resin part	PPS black (UL94V-0) (only for OQ-43 series)
Finsh	Au plating over Ni
Rated current	OQ-11, 12, 13 series	2A
	OQ-21, 22, 23 series	3A
	OQ-43 series	5A
Insulation resistance	500M ohm or more
Dielectric strength	1000V AC, DC 1min 700V AC, DC 1min (OQ-11, 21 series)
Temperature range (degrees Celsius)	-40 to +125

Model no.	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	P (mm)	Max pin
OQ-11-4.2	4.2	1.5	0.45	0.635	50.8	1.27	40
OQ-11-5	5	1.5	0.45	0.635	50.8	1.27	40
OQ-11-6.5	6.5	1.5	0.45	0.635	50.8	1.27	40
OQ-12-4.2	4.2	1.5	0.45	0.889	56.89	1.778	32
OQ-12-5	5	1.5	0.45	0.889	56.89	1.778	32
OQ-12-6.5	6.5	1.5	0.45	0.889	56.89	1.778	32
OQ-13-4.2	4.2	1.5	0.45	0.635	50	2.54	20
OQ-13-5	5	1.5	0.45	0.635	50	2.54	20
OQ-13-6.5	6.5	1.5	0.45	0.635	50	2.54	20
OQ-21-5	5	1.5	0.6	0.8	51.13	1.27	40
OQ-21-8	8	1.5	0.6	0.8	51.13	1.27	40
OQ-21-10	10	1.5	0.6	0.8	51.13	1.27	40
OQ-21-12	12	1.5	0.6	0.8	51.13	1.27	40
OQ-21-15	15	1.5	0.6	0.8	51.13	1.27	40

Model no.	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	P (mm)	Max pin
OQ-22-5	5	1.5	0.6	0.889	56.89	1.778	32
OQ-22-8	8	1.5	0.6	0.889	56.89	1.778	32
OQ-22-10	10	1.5	0.6	0.889	56.89	1.778	32
OQ-22-12	12	1.5	0.6	0.889	56.89	1.778	32
OQ-22-15	15	1.5	0.6	0.889	56.89	1.778	32
OQ-23-5	5	1.5	0.6	0.8	50	2.54	20
OQ-23-8	8	1.5	0.6	0.8	50	2.54	20
OQ-23-10	10	1.5	0.6	0.8	50	2.54	20
OQ-23-12	12	1.5	0.6	0.8	50	2.54	20
OQ-23-15	15	1.5	0.6	0.8	50	2.54	20
OQ-43-8	8	2.0	1.0	1.27	50.8	2.54	20
OQ-43-10	10	2.0	1.0	1.27	50.8	2.54	20
OQ-43-12	12	2.0	1.0	1.27	50.8	2.54	20
OQ-43-15	15	2.0	1.0	1.27	50.8	2.54	20

*Notice
When long connected type is used, it may happen to bend on reflow.
Use of glue to prevent from bending is recommendable.

HOW TO ORDER
OQ-11-4.2-10P
Put # of pins if necessary.